Can a Motorcycle Run a Red Light? Know Your Rights

✓ TIP: Are you in compliance with the motorcycle laws of your state?

You should ensure that you have the correct motorcycle insurance coverage.

Enter your zip to get started.


Do you remember the first time you pulled up to a red light on your motorcycle and it kept going through all of them without you even letting go? Do you ever feel the need for a red light to be run? This is okay for a motorcycle. Do motorcycles have different rules than cars when it comes to riding at traffic lights?

Can you ride a motorcycle with a red light? Yes, under certain circumstances a motorcycle can run a red light if the lights have cycled through or they aren’t changing at all to let you through the intersection. You must do it safely and quickly once you are clear of all other vehicles.

We will be discussing the specific conditions that enable you to run red lights so that you are an informed rider. This knowledge will help you to keep you and your passengers safe while you are riding. Keep reading to learn more.

Legality of a motorcycle running a red light

I grew up near the midwest United States in a small community with only 4 stop lights. One of these was known for not turning green for East-West traffic when it got dark outside. Anyone riding a motorcycle on a road would need to wait until the intersection is cleared before they could go through the light. This always makes me wonder if they are breaking the law.

Most people learn to drive by driving one of their parent’s cars. Then they are taught all about traffic laws. While many of the same traffic laws are applicable to motorcycles, there are also some exceptions.

The motorcycle permit test is a completely different test than the regular driver’s test. There are enough differences between safety and law to warrant a separate exam.

What is the best time for a motorcycle to run a red light, then? It is true that there is a law known as the “dead red law”. This law permits you to run the red light in certain circumstances. This only applies to red lights that are still on. If the light turns through all the drivers, but does not allow you to go, then you can legally drive. “run the red light”.

It is important to know that this law does not apply if you have been waiting at a light that hasn’t come yet. This cannot be used as an excuse to just run every red light, without waiting. You will be issued a ticket if a police officer spots you doing this. This only applies if the light fails to see you and continues to allow traffic lanes to pass, while not allowing yours to.

After waiting enough, you are now able to run by the “dead red law”You can pass through the intersection if it is safe. Remember that cars with green lights through an intersection won’t yield to you, and they don’t expect anyone to follow them. Only exit the intersection when it is safe.

How to Safely Proceed Through a Red Light When Legal

You are now ready to pull away from the light but you are stuck at it. Are there any best practices when you run a red signal? It is important to pay attention to your surroundings. Focus on riding and don’t think about other things. Before you start riding, focus on the ride and scan the area for cars.

Look first. When you look at an intersection, the first thing that you should do is check the traffic coming to your destination first. If you are driving straight through an intersection, the traffic lane you will be crossing first would be this lane. You can now check the traffic from the other direction once you have confirmed that you are able to pass through the intersection.

Once you are certain that you understand it, look back at where you were looking before you make any changes. You need to make sure it is clear, even if you have looked away. If it is, you can safely pull into the intersection.

When you’re passing through an intersection, it is important to stay focused and alert of all around you. To make sure no one unexpectedly or quickly approaches your head, keep it on a swivel. Keep this mindset until you reach the end of the intersection.

You can ensure your safety by following these steps each time you go through an intersection. Remember that other drivers won’t expect you to run the red lights, so they are not actively looking.

Why Motorcycle Traffic Lights Stay On Red

Why do some traffic lights stay on for motorcycles while others are not? This is due to the design of traffic lights. Older traffic lights use the vehicle’s weight to determine whether there are cars present.. Many of these systems use inductive loops to detect the presence of metals.

Motorcycles are lighter than cars so they may not be able to convince the sensor that a vehicle is present. Because they have less metal than vehicles, they may not produce enough inductive voltage. Therefore, you can’t wait to see the light for too long.

Modern traffic light designs are much more efficient and will no longer pose a problem. Newer designs incorporate heat sensors and motion sensor technology to detect when a vehicle is there..

Although your motorcycle might not be able to trigger a weight sensor, it can set off a motion sensor. As optical technology advances, traffic lights’ functionality will also improve.

This issue may not be present with modern traffic lights but older models still exist and are scattered all over the place. This is why it is so important to know all the laws that surround these lights. The truth is that you won’t know until it stops working if the lights you have on are working for you. It is important to be informed in order to keep yourself and others safe.

Is it possible to activate traffic lights even if they don’t change?

Is there a way to make a traffic light turn green if you’re stuck at it? It may be possible depending on what kind of traffic light it is. The trick to activating a traffic light using an inductive loop is to sense if there are vehicles present. You will need two Neodymium magnets to do this.

It is important to choose one with good strength. A tape will be needed to attach them. Mount these magnets parallel to the road. As you approach these traffic lights, the magnets will create a strong magnetic field which will trigger the sensors. So you won’t worry about never triggering these types sensors.

This may not always be possible depending on what type of light you have. Traffic light technology is more advanced and uses sensors and technology that prevents this from ever becoming an issue. These problems should not be repeated as you approach these types lights. You will enjoy a better experience at traffic lights as new technology is constantly being developed.

Last but not least, if ever you find yourself at a red stop sign and can’t get it to turn, know that you legally have the legal right to cross the stop sign. The law is there for you if you are unable to get the light to turn on. You can continue as normal. Be careful when doing this.

Leave a Comment