What happens to a motorcycle alarm’s battery? The Surprising Fact

✓ TIP: Do you have anti-theft protections in place to protect your bike?

Find out if your motorcycle insurance policy offers you anti-theft discounts.

Enter your zip to get started.


To give their motorcycle some protection, many people wish to have an alarm installed. However, these alarms are aftermarket and need to be plugged into your existing wiring. This raises questions for the consumers.

Can a motorcycle alarm drain the batteries? Yes, motorcycle alarms draw current from the battery which eventually causes it to drain. Your battery will not be affected if your motorcycle is parked for only a few minutes. However, if your bike sits for more than a week, it can cause battery drain.

Do these systems have any side effects? It will drain your battery. These systems can cause your bike to stop being started and drain your battery. This can be avoided, as we’ll show you in this article.

What Can Cause an Alarm to Drain A Battery?

An alarm can drain a motorcycle’s battery. There may be many reasons this might happen. The alarm type you use determines how much drainage occurs. Different alarm types work in different ways.

There are many aftermarket security products that you can choose from. Many systems use proximity sensors to detect when someone approaches your bike. They can also set off alarms if they touch the bike or get too close to it. This will hopefully scare them away.

A security system that uses a proximity sensor will require constant voltage to power the sensor.. Your battery will experience a slight power draw. Although this won’t drain your battery instantly, it can cause your battery voltage to drop too low over time for your motorcycle to start.

Two-way systems are what alarm systems are commonly known for. The transponder is something you would carry with you. This would enable you to press a “panic” If you wish to, press the button. These systems will transmit a signal to transponder at a predetermined time to verify communication. The alarm system will continue to draw power from your motorcycle.

Depending on what alarm system you have, there may be other things draining your battery. You should understand the workings of each alarm system before you consider purchasing one.. This will give you an idea about the power draw you can expect, and how to avoid it if you need.

You might worry about your motorcycle if you leave it parked in the public. You can be easily damaged or vandalized by others. You might need an additional level of security to provide you with more peace of mind.

How to prevent battery drainage from an alarm

What can you do to prevent your battery draining if you have an alarm? There are several ways to use alarm systems while still preserving your battery life. This will give you peace of mind knowing that your bike will be safe, and also ensure that you don’t attempt to start it up with a full tank.

First, you can use a battery tender if your motorcycle is not being driven.. These devices will ensure that your battery voltage is constant. The device will gradually charge the battery while it is being drained in order to maintain the voltage. This has one major drawback: it must be plugged in to a power outlet. There is no benefit to using this if it isn’t possible to plug it into.

Another trick is to simply install a toggle switch that connects your alarm system to your battery.. This will allow the alarm system to be turned on and off as you wish. This way, if you are going out for the evening, your alarm can be left on. You can then turn your alarm off if you’re not going to be riding your bike in a while but you feel confident it is safe.

A simple toggle switch can be hidden on your motorcycle to prevent battery drain. This is a simple and inexpensive fix. Make sure you turn off the alarm system when you return from work.

What to Do After the Battery has been Drained

If you find that your battery has gone flat, what do you do? It is necessary to recharge your battery. You may have to do it differently depending on where you live. Jumpstarting it is the easiest method.

This could be your only choice if you are far away from home. Jumper cables are necessary if you need them. Then you can find someone to help you. Simply connect both the red and black cables on both vehicles to the positive terminals. Then, wait for it to charge and then turn it back on.. This is a simple and fast way to charge your battery again.

A battery charger can be used if you are at home but not in hurry to charge the device. This is a huge advantage. These battery charging systems can be used to regulate the amount of amperage that is sent to the battery. This allows you to charge your battery at a lower current. This will maximize your battery’s life.

Your battery’s life is always shortened when it deep cycles. When the battery is completely drained and completely recharged, it shortens the battery’s life. You can damage the battery if you do not fully charge it quickly.

It is best to charge your battery slowly overnight.. The location you are in when your battery is dead and the length of time it takes you to get your bike back on the road again will play a major role.

You can also keep your motorcycle safe without installing an alarm

You might want to protect your motorcycle, but don’t want the hassle of having an alarm system drain your battery. What can you do to help? There are many options for motorcycle security devices you can use in lieu of an alarm system. These will protect your battery and ensure no one steals your motorcycle.

Ground anchor is the first.. This strap is strong and thick. It goes through your motorcycle’s wheel and anchors to different surfaces. These anchors can be connected to walls or concrete and bolted onto various surfaces. This system can be used to protect your motorcycle from being stolen. These systems cannot be used anywhere else.

A padlock and a chain are similar options that you can use in public. This can be used in the exact same way, but wrap the chain around your rear wheel to prevent anyone from rolling the motorcycle.

A disk lock is another cool invention.. These locks attach to your motorcycle’s brake disk. This will prevent your wheel from turning. They are small and easy to put in and take out. When not in use, they are easy to store.

You can protect your motorcycle when you aren’t there, but there are many other options.. It’s up to you to choose what and how to use it. There are many options on the market for motorcycles.

Leave a Comment